Preventative Maintenance, Personal Responsibility Key To Keeping Your ‘Old’ Car Running

ecp inc reviews

What defines an “old” car and how can you keep one on the road for as long as possible? To answer the former question, automotive experts say that anything over the 150,000-mile mark is well on its way to “old” status. Reaching this point always requires regular care and sometimes a bit of luck, too. For owners of vehicles who’ve surpassed 150,000 or even 200,000 miles, it may be wise to sit down and plan what work needs to be done to keep your vehicle running for as long as possible. From taking care of the body — which ECP Inc reviews will show is a task best done regularly — to motor maintenance and fluid changes, it’s entirely possible to keep a car on the road beyond 300,00 miles. We hope to show you how with this article.


Belts and Whistles: While major jobs like timing belt or serpentine belt change are infrequent even on newer vehicle, the importance of this task on your older car can’t be understated. That’s because a worn timing belt can slip or snap, throwing the cylinder valves out of order and causing major motor damage that’s inflicted by the pistons. The various tasks that a serpentine belt performs, from the alternator to power steering and the water pump, are all crucial to driving and that means that you’ll be stranded should this one go unexpectedly. Keep tabs on when the job was done last and have these belts changed every 60,000 to 100,000 miles.


Skin-Deep Perfections: As ECP Inc reviews will show you, protective coating products aren’t a vanity item. This company, which has been in the automotive sector for more than four decades and has partnerships with dealers across the globe, offers a corrosion protection and sound shield program that’s designed to defend against road salt and ocean spray. Once rust  takes hold, it’s difficult to stop. By opting for this program for new or pre-driven vehicles, you can advertise them as having protection against peeling, chipping and cracking paint plus perforation caused by the elements outside.


A Watchful Eye: Most of all, take time out to learn about your vehicle. Buy a maintenance manual from an auto parts store or off of the Internet and read through the introductory information chapter to understand what common work should be done and at which intervals. If during your research you learn that your particular make and model is susceptible to transmission failures, make sure that you regularly change the fluid. In short, keeping an old car running isn’t difficult if you take time out to read up on ECP Inc reviews, learn about caring for the exterior, interior and the characteristics of what’s under the hood.

Do Auto Detailing Right With These Best Practices Using Top-Shelf Products

ecp inc reviews

Most everyone raves about that “new car smell,” but what about the new car shine? Few things can catch an eye better than the glossy and glowing appearance of a well-detailed car. However, pulling off such an accomplishment requires a lot more than a bucket of water, soap and a hose. To effectively clean up a car — and protect it from the elements, for that matter — one needs proper training to know how to go about the detailing process so that the end result is something you can be proud of. For auto dealerships with an entire fleet of vehicles under their wing, trusting companies like ECP Incorporated to get you the very best in protective care products is a wise move. By using the wide array of waxes, gels, paints, coats and other applications, you’ll extend the life of the vehicles and make them look a whole lot better almost immediately.

By reading up on ECP Inc reviews, dealers will learn that ECP Plus and Ultimate lines from this company are designed to improve appearance. Through appropriate application, you’ll get your vehicles looking like they did the day they rolled out of the factory. However, aesthetics is just one reason for detailing. With that in mind, ECP Incorporated would like to offer a few tips when it comes to correct detailing practices.

The first step is to always prepare the vehicle for the process. Given that most dealerships are working with brand new or typically newer vehicles, the need to extensively clean may not exist but this is still often the best place to begin. Microfiber cloths will also help with getting rid of grime that’s been building up on the various interior surface. Some automotive experts suggest the use of moisturizing products when wiping down the dashboard or leather seats, for example, as this can defend the surfaces from spills or stains. When it comes to cleaning the exterior with specialized products like the ones offered by ECP Incorporated, tires are often either overlooked or ignored due to the difficulty of cleaning them. ECP Inc reviews show that the best tire dressings are water-based and made from a blend of silicone oils, emulsions and leveling agents. The purpose of this product is to give your tires an eye-catching shine and increase durability. Given that ECP Incorporated’s mission is to preserve value, the point of investing in these top-shelf products is to do detailing right the first time.

Make Educated Decision When Purchasing The Right Weight, Blend Of Motor Oil


Any mechanic will tell you that failing to change your oil at regular intervals is inexcusable. You can either keep an eye on the sticker the mechanic likely put inside your vehicle at the time of your last change or write the mileage down yourself on a sheet of paper that should be kept inside your car. It’s that simple, but the implications of failing to do so can be catastrophic. That’s because motor oil is what keeps your engine running; not in the sense that gasoline provides the fuel for momentum, but motor oil keeps your engine from overheating due to friction and lubricates critical hidden components. With every mile added to the odometer, the usefulness of your oil is decreased and the need for the next change nears.

That being said, we realize that picking out the appropriate motor oil can be confusing. There are many different weights, temperatures, blends and brands to consider so we are here to shed a little light on the topic. ECP Incorporated has been an industry leader in automotive coating protection products since 1969 and have picked up plenty of lessons along the way. In this article, we’ll explain the basics of motor oil and which one is the best fit for the typical motorist. The higher the number, the greater the viscosity that is set by the Society of Automotive Engineers. On the lower end, the “5” in 5W-30 motor oil is good for temperatures that can dip to -25 degrees Fahrenheit. The “30” is representative of the temperatures that most motor vehicles will encounter; a “50” offers a little bit more protection.

As for whether you should purchase a synthetic motor oil blend or conventional oil, which is derived directly from crude oil, ECP Inc reviews show that the payoff for a higher price is improved performance and less sludge left behind in your engine as the oil breaks down. Your vehicle’s manual will suggest the right weight and blend of motor oil, but it never hurts to know your options!

Car Paint Scratched Or Chipped? Repair Can Be Done At Home With The Right Tools


As the owner of a motor vehicle, you’re bound to experience one of the following situations at some point: Someone “keyed” the side of your car, someone opened their door into the side of your car or you backed into a pole and scratched up the paint job on your own car. As much of a headache and disappointment these occurrences may be, be thankful that you can fix them a little bit more than elbow grease. While you’re going to have to muster up the aforementioned elbow grease, ECP Incorporated has plenty of tips to remedy the imperfections now tarnishing your car.  That’s because the protective coatings company, which has been an aftermarket leader in automotive products since 1969, has picked up a few tricks of the trade along the way. The dedicated staff at Entire Car Protection Inc. loves motor vehicles and hates to see them driving around either dirty or defective. Before we begin, know that even minor scratches are a cause for concern because they provide a gateway for rust and deterioration to take hold.

To do the job right, you’ll need sandpaper, solvent, a rubbing compound, plastic blocks for overspray, primer, base coat and clear coat. Don’t forget the various clean-up and dust rags because, as predicted, this one can get a little messy.

  • You’ll need sandpaper to prepare the surface for painting and will begin with a coarse sheet that can get the surrounding area down to the depth of the scratch. The first coat of paint that comes after this step is the primer.
  • The base coat comes next and will requiring sanding again, however this time with progressively less abrasive sheets between applications.
  • Automotive experts say that the clear coat, which is the final step, must dry overnight for your work to have been truly effective and give off that “glossy” look that new cars have.

ECP Inc reviews show that if you want to keep your car’s paint job looking fresh, then there are a number of polishes and conditioners designed to deliver a high-gloss shine. If you’re faced with a repair task before be able to give your car a thorough washing, know that you can accomplish this at home with the right tools.

Heed These 3 Motorcycle Riding Tips For Fun Adventure, Safe Return

At ECP Incorporated, we love motorcycles. Our skilled staff have recommended many protective coating products to dealerships that sell bikes and in the process, have fallen head over heels for a few of them on appearance alone. There’s something sleek about motorcycles that speaks to us. They also offer one of the greatest escapes to those who loving getting out on the open road. However, motorcycles can be a dangerous proposition for those who think they know how to ride — but don’t. Now that summer riding season is in full swing, we’ve gathered tips from seasoned riders that will help get you where you need to go and do it without all the drama.

  • See and be seen: In theory, of course you want other motorists to see you. In practice, you need to position yourself somewhere on the road where other drivers are going to be aware of your presence. Keep back safe distances and get into their rear view mirrors. Also, wearing brighter colors or at least a bright-colored helmet should be enough to catch their eyes.
  • Predicting the future: One of the secrets to safe riding is looking at where you want to go. By trusting ECP Inc reviews, you’ll learn that looking where on the road you need to be is the only way to get there. If you start daydreaming, you’re bound to end up in a tight spot eventually. Keep your eyes on the road and ride defensively.
  • Don’t overdo it: Given the risks of riding, it’s important to do so within your realm of capabilities. Don’t go faster than you’re comfortable with just because the rest of your group is leading the pack; you’ll all reach the same destination eventually. After a successful ride, trust ECP Incorporated to offer products that will get your motorcycle looking like it did the day it rolled off the lot.